Engine
| |
| > Rated Net Power @ 2300 rpm |
|
| > Model |
|
| >
Max. Net Power @ 2000 rpm |
|
| >
Bore |
|
| > Stroke |
|
| > Displacement |
|
| > Net Torque |
|
| > Peak Torque |
|
| |
|
Buckets
| |
| > Bucket Capacities |
|
| |
|
Weights
| |
| > Operating Weight |
|
| |
|
Steering
|
|
| > Steering Articulation |
|
| > Min turning radius (over tire) |
|
| > Steering angle, each direction |
|
| > Steering Cylinders,two,bore |
|
| > Hydraulic output at 2300 engine rpm and 6900 kPa (1000 psi) |
|
| > Maximum working pressure |
|
| |
|
Loader Hydraulic System
|
|
| > Output at 2300 engine rpm and 6900 kPa (1000 psi) with SAE 10W oil at 65¡ãC |
|
| > Hydraulic Cycle Time |
|
| > Pump flow - Implement pump |
|
| > Relief Pressure - Implement pump |
|
| > Maximum working pressure |
|
| > Hydraulic cycle time: |
|
| > Raise |
|
| > Dump |
|
| > Lower, empty, float down |
|
| > Total |
|
| > Lift cylinders, double acting Bore/Stroke |
|
| |
|
| Service Refill Capacities
|
|
| > Fuel tank |
|
| > Cooling system |
|
| > Crankcase |
|
| > Transmission |
|
| > Differentials and final drives: front/rear |
|
| > Hydraulic system (including tank) |
|
| > Hydraulic tank |
|
| |
|
| Transmission
|
|
| > Standard transmission max travel speeds |
|
| > Forward 1/2/3/4 |
|
| > Reverse 1 |
|
| |
|
Tyres
|
|
| > Size |
|
| > Tread Width |
|
| > Reverse 1 |
|
| > Cab |
|
| > ROPS |
|
| > FOPS |
|
| > Reverse 1 |
|
| |
|
| Dimensions
|
|
| > Wheelbase |
|
| > Width over tires |
|
| > Height to Top of ROPS/FOPS |
|
| > Height to Top of Exhaust Stack |
|
| > Height to Top of Hood |
|
| > Height to Center of Axle |
|
| > Ground Clearance |
|
| > Overall Length |
|
| > Length - Rear Axle to Bumper |
|
| > Center Line of Front Axle-Hitch |
|
| > Dump Clearance-Max Lift-45¡ã |
|
| > Bucket Clearance-Max Lift/Carry |
|
| > Bucket Pin Height at Max Lift |
|
| > Overall Height - Bucket Raised |
|
| > Reach at Max Lift and 45¡ã Dump |
|
| > Rack Back Angle at Max Lift |
|
| > Dump Angle at Max Lift |
|
| > Rack Back Angle-Ground |
|
| > Rack Back Angle at Carry |
|
| > Carry Height |
|
| > Digging Depth |
|
| |
|
| Operating Specifications
|
|
| > Static Tipping Load (Full Turn) |
|
| > Reach - full lift/45 degree dump angle |
|
| > Dump clearance - Full lift/45 degree dump angle |
|
| > Articulation Angle |
|
|
|
